Proximity Reader
Specifications
GEMPROX-26M
13.56 MHz RF frequency has being the main trend for
high security access control integration nowadays and the
future, GEMPROX-26M Proximity Reader unit is compatible
with. Mifare card provides a unique 32 bits serial number for
each card, and reader Ignoring that store up "KEY"
transportation from manufacturers,
Operating Voltage: 7~12 Vdc
Current Draw: Average 70mA, Peak 110mA @ 12Vdc
Transmitting Frequenc:13.56 MHz Mifare S50 compatible
Code Processing: Check card serial number reading only
Output Format: Wiegand 26-bit hexadecimal
Read Range:4cm )Depending on local installation
conditions(
Cable: 6 conductor (#24 AWG) stranded with shield for
Typical Wiegand installation
Statement
Unobtrusive and stylish slim design can be mounted directly
onto metal such as door mullions, GEMPROX Proximity
remote locations when used in
Reader is suited for
a
conjunction with an on-line system. Sealed with potting
compound to withstand harsh environments providing reliable
performance and high degree of vandal resistance.
GEMPROX-H
Operating Voltage: 8~12 Vdc
Current Draw: Average 50mA, Peak 60mA @ 12Vdc
Transmitting Frequency : 125 KHz
Card Verifies and Code Processing: Check Facility
code only accept any ID
Output Format: Wiegand 26~37-bit hexadecimal
Read Range: 6 cm )Depending on local installation
Conditions)
GEMPROX Proximity Reader features for reading any
compatible cards serial number. It supports Wiegand 26-bits
or 26~37 bits output interfaces with all existing Wiegand
protocol access control system Wiegand. The Green LED
flashes and the beeper sounds when a proximity card is
presented to the reader. The bi-color LED and beeper can also
be controlled individually by the host system.
Cable: 6 conductor (#24 AWG) stranded with shield
for typical Wiegand installation
Dimension
16
44
GEMPROX-E
Operating Voltage: 12 Vdc
Current Draw: Average 50mA, Peak 70mA @ 12Vdc
Transmitting Frequency : 125KHz (EM-400x compatible)
Output Format: Wiegand 26-bit hexadecimal
88
Read Range:
8
conditions(
cm)Depending on local installation
Cable: 7 conductor (#24 AWG) stranded with shield for
Typical Wiegand installation
Unit: mm
Warranty
The product is warranted against defects in material and
1
workmanship while used in normal service for a period of
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
The products are manufactured under an ISO
9001
&
QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-GEMPROX Ver. E Published on 2008.07.30
|