Gemini Iron PL 2410 E User Manual

Fig. 2  
Abb. 2  
Eik. 2  
2. Ábra  
Obr. 2  
Rys 2  
Фиг. 2  
Рис. 2  
Fig. 3  
Abb. 3  
Eik. 3  
3. Ábra  
Obr. 3  
Rys 3  
Фиг. 3  
Рис. 3  
ES - MANUAL DE INSTRUCCIONES  
PT - MANUAL DE INSTRUÇÕES  
EN - INSTRUCTIONS FOR USE  
FR - MANUEL D’UTILISATION  
DE - GEBRAUCHSANWEISUNG  
IT - MANUALE DI ISTRUZIONI  
EL - ENTYÐÏ ÏÄÇÃÉÙN  
HU - HASZNÁLATI ÚTMUTATÓ  
CZ - NÁVOD K POUŽITÍ  
SK - NÁVOD NA POUŽITIE  
PL - INSTRUKCJA OBSŁUGI  
BG - ИНСТРУКЦИЯ ЗА УПОТРЕБА  
RU - ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ  
Fig. 5  
Abb. 5  
Eik. 5  
5. Ábra  
Obr. 5  
Rys 5  
Фиг. 5  
Рис. 5  
Fig. 4  
Abb. 4  
Eik. 4  
4. Ábra  
Obr. 4  
Rys 4  
Фиг. 4  
Рис. 4  
Fig. 6  
Abb. 6  
Eik. 6  
6. Ábra  
Obr. 6  
Rys 6  
Фиг. 6  
Рис. 6  
Fig. 7  
Abb. 7  
Eik. 7  
7. Ábra  
Obr. 7  
Rys 7  
Фиг. 7  
Рис. 7  
El fabricante se reserva los derechos de modificar los modelos descritos en este Manual de Instrucciones.  
O fabricante, reserva-se os direitos de modificar os modelos descritos neste Manual de Instruções.  
The manufacturer reserves the right to modify the models described in this User’s Manual.  
Le fabricant se réserve le droit de modifier les modèles décrit dans le présente notice.  
Der Hersteller behält sich das Recht vor, die in dieser Gebrauchsanweisung beschrieben Modelle zu verändern.  
Il fabbricante si riserva il diritto a modificare i modelli descritti in questo Manuale d’Istruzioni.  
O kátáókåváóôÞò äéáôçñåß áðïêëåéóôéêÜ ôï äéêáßùìá íá ôñïðïðïéÞóåé ôá ìïíôÝëá ðïõ ðåñéãñÜöïíôáé óôï ðáñüí Åíôõðï Ïäçãéþí  
A gyártó fenntartja magának a jogot a használati útmutatóban közölt műszaki adatok megváltoztatására.  
Výrobce si vyhrazuje právo modifikovat modely popsané v tomto uživatelském návodu.  
PLANCHA ELECTRÓNICA / FEERO DE ENGOMAR ELECTRÓNICO / ELECTRIC IRON /  
FER À REPASSER ÉLECTRONIQUE/ ELEKTRISCHES BÜGELEISEN /  
FERRO DA STIRO ELETTRONICO / HËÅÊÔÑÏÍÉÊÏ ÓÉÄÅÑÏ / ELEKTROMOS VASALÓ /  
ELEKTRONICKÁ ŽEHLIČKA / ELEKTRONICKÁ ŽEHLIČKA /  
.
Výrobca si vyhradzuje právo modifikovať modely opísané v tomto užívateľskom návode.  
ŻELAZKO ELEKTRYCZNE / ЕЛЕКТРОННА ЮТИЯ / ЭЛЕКТРОННЫЙ УТЮГ  
Producent zastrzega sobie prawo do modyfikowania modeli opisanych w niniejszej instrukcji obsługi.  
Производителя си запазва правото променя моделите описани в този наръчник.  
Производитель оставляет за собой право замены модели, описанные в данном Руководстве пользователя.  
Fig. 8  
Abb. 8  
Eik. 8  
8. Ábra  
Obr. 8  
Rys 8  
Фиг. 8  
Рис. 8  
Fig. 9  
Abb. 9  
Eik. 9  
9. Ábra  
Obr. 9  
Rys 9  
Фиг. 9  
Рис. 9  
MOD.:  
PL-2410 E  
PL-2450 E  
N.I.F. F-20.020.517 - B. San Andrés, n. 18 • Apartado 49 - 20500 MONDRAGON (Guipúzcoa) ESPAÑA  
N.I.F. F-20.020.517 - Bº. San Andrés, nº 18 •  
Apartado 49 - 20500 MONDRAGON (Guipúzcoa) ESPAÑA  
Diciembre 2006  
 
EN  
After removing the packaging, check that  
the appliance is in perfect condition, if  
in doubt, contact the nearest Technical  
Support Service.  
Packaging elements (plastic bags,  
polystyrene foam, etc.), should not be left  
within the reach of children because they  
can be dangerous.  
The appliance is for domestic use only.  
Any other use is considered unsuitable or  
dangerous.  
The manufacturer shall not be responsible  
for any damages that may arise from  
improper or inadequate use, or for repairs  
conducted by non-qualified personnel.  
Do not touch the appliance with wet or  
damp hands or feet.  
1. DESCRIPTION (FIG. 1)  
1. Handle  
2. Spray button  
3. Extra spray button  
4. LCD screen  
5. ON/OFF steam button  
6. LCD screen “Increase temperature”  
setting  
7. LCD screen “Lower temperature”  
setting  
8. Water reservoir cover  
9. Spray nozzle  
10. Self-clean button  
11. Cord  
Keep the appliance separate from water or  
other liquids, to avoid electric shock; do not  
connect the appliance to the mains if it is  
on a damp surface.  
2. TECHNICAL CHARACTERISTICS  
See characteristics plate.  
Place the appliance on a dry, firm and  
stable surface.  
Do not allow children or the disabled to  
handle the appliance unsupervised.  
Do not leave the appliance unattended  
when it is turned on because it can be  
dangerous.  
This product complies with the European  
Directives on Electromagnetic Compatibility  
and Low Voltage.  
3. SAFETY PRECAUTIONS  
When removing the plug never pull on the  
cable.  
Unplug the appliance before cleaning or  
maintenance.  
In the event of fault or malfunction where  
the appliance is not to be used, turn off  
the appliance and do not attempt to repair.  
If a repair is required, contact a Technical  
Assistance Service authorised by the  
manufacturer and request the use of  
original spare parts.  
If the cable for this appliance is damaged,  
contact an authorised Technical Assistance  
Service for it to be replaced.  
Do not leave the appliance exposed to the  
elements (rain, sun, ice, etc.).  
Do not use or let any part of the appliance  
come into contact or near hot surfaces  
(kitchen gas or electric hobs or ovens).  
Do not use detergents or abrasive sponges  
to clean the appliance.  
Do not touch the hot surfaces. Use the  
handles.  
Do not let the cable come into contact with  
Before using this appliance for the first  
time, read the following instructions  
carefully and keep them for future  
reference.  
Make sure that the mains voltage in your  
home corresponds to that indicated on the  
appliance.  
In the event of incompatibility between  
the mains socket and the appliance plug,  
replace the socket with a suitable one,  
using a qualified professional.  
The electrical safety of the appliance is only  
guaranteed if it is connected to an efficient  
earth installation, as foreseen in applicable  
electrical safety regulations. If in doubt,  
contact a qualified professional.  
The use of adaptors, multiple sockets and  
or extension cables is not recommended.  
Where it is not possible to avoid their use,  
only adaptors or extensions that comply  
with applicable safety regulations should  
be used, and ensuring that the indicated  
voltage limit is not exceeded.  
11  
 
the hot parts of the appliance.  
Do not direct the steam jet towards people.  
Do not use the iron on excessively wet  
fabrics.  
LCD SCREEN  
APPROX. TEMP.  
FABRIC  
Acrylic  
70 - 90ºC  
••  
ACRYL  
NYLON  
POLYE  
BLEND  
Do not leave the iron supported on its base  
while it is hot; leave it to cool down.  
Do not use stain-removing mixes or similar  
products on fabrics to be ironed.  
110 - 130ºC  
115 - 135ºC  
145 - 165ºC  
160 - 180ºC  
180 - 200ºC  
185 - 205ºC  
Nylon  
••  
Polyester  
Cotton and  
blends  
4. FILLING THE WATER RESERVOIR  
•••  
•••  
•••  
MAX  
Wool  
Cotton  
Linen  
WOOL  
COTTO  
LINEN  
Place the unplugged iron on a stable  
surface.  
Lift the water inlet cover. (8)  
Pour the water into the reservoir hole  
using a glass (Fig. B).  
Do not put any cleaning products or  
solvents into the water reservoir.  
Check that the water does not exceed  
the maximum level and replace the  
cover (8).  
5. The  
symbol will appear and  
the “” symbol will flash when the  
temperature changes from lower to  
higher and the “” symbol will flash  
when you change from higher to lower.  
6. When the sole reaches the right  
temperature, you will hear a beeping  
N.B.: If the water in the area where you live  
is too hard (>27oF), we recommend that  
you use distilled water. Do not use battery  
water or water with added starch, perfume,  
conditioner, etc.  
sound and the “  
on. The “” and ” symbols will  
disappear.  
” symbol will come  
7. The iron is ready for use.  
5. SETTING THE TEMPERATURE  
6. DRY IRONING  
1. Place the iron on a stable surface  
and plug it in. Press the “increase  
temperature” regulator (6) to turn on  
the unit.  
2. The LCD screen (4) will light up for a  
second and you will hear a beep when it  
when it goes off.  
3. Change the temperature with the  
screen settings: press the “increase  
temperature” regulator (6) to raise  
the temperature from 1 to 3 and  
to Maximum. Press the “lower  
temperature” setting (7) to lower the  
temperature setting (Fig C).  
1. Place the iron on a stable, heat-resistant  
surface and plug it in. Press the  
“increase temperature” regulator (6)  
to turn on the unit.  
2. The LCD screen (4) will show all the  
symbols at once and you will hear a  
beep. The screen will then show Point 1  
and the iron will begin to heat up.  
3. Select the right temperature. See  
Section 4. “Setting the temperature”  
4. When you hear the beep and the “  
symbol appears, the iron is hot and  
ready to use.  
4. To select the right temperature for each  
item to be ironed, select the correct  
point and the correct item, which will  
appear on the LCD screen while you  
move from one point to the next. Use  
this table as a guide:  
5. If you want to disconnect the iron, hold  
the “increase temperature” setting (6)  
down for 2 seconds (Fig. D). The screen  
will go off with a beep.  
6. Unplug the iron and let it cool down  
before storing it away.  
12  
 
steam button so as to allow the iron to heat  
up again and thereby obtain the maximum  
amount of extra steam.  
Upright steam: The extra steam function  
also works when the iron is in an upright  
position. To use this function, hold the iron  
upright around 15-30 cm away from the item,  
press the extra steam button (3), and the  
steam will come out of the holes in the sole  
(Fig. G).  
7. STEAM IRONING  
1. Fill the iron as described in Section 3 “Filling the  
water reservoir” and plug in the iron. Press the  
“increase temperature” regulator (6) to turn on  
the unit.  
2. The LCD screen (4) will show all the symbols at  
once and you will hear a beep. Then the screen will  
show Point 1 and the iron will start to heat up.  
3. Select the right temperature. See Section 4  
“Setting the temperature”.  
CAUTION: Do not direct the iron towards  
people as the temperature of the steam is  
very high.  
4. Select the steam option by pressing the steam  
button (5). The iron will give a whistle and  
the  
symbol will start flashing. Wait until the  
symbol appears on the screen indicating that the  
steam is ready  
10. AUTOMATIC SHUT-OFF  
5. When you want to disconnect the steam, again  
The shut-off function will work automatically  
when the iron is left unattended whilst  
connected to the mains.  
press the steam button (5). The  
stop flashing.  
symbol will  
6. If you wish to disconnect the iron, hold the  
“increase temperature” setting (6) down for 2  
seconds (Fig. D). The screen will go off with a  
beep.  
7. Unplug the iron and let it cool down before storing  
it away.  
Automatic shut-off while the iron is  
horizontal position or lying on its side:  
If the iron remains immobile for 30  
seconds in an ironing position (horizontal  
or on its side), the iron will disconnect  
automatically. The " " pause symbol on  
the LCD screen and the light will go off. To  
reconnect, simply move the iron.  
Automatic shut-off in the upright  
position:  
If the iron remains immobile for 8 minutes  
on its support base (upright), the iron will  
disconnect automatically. “AUTOMATIC  
SHUT-OFF” will appear on the LCD screen  
and the light will go off. To reconnect,  
simply move the iron. N.B: the iron will  
take 60 seconds to reach its previous  
temperature.  
8. SPRAY  
To use this function there must be water in  
the reservoir. If you wish to obtain a spray  
of water to dampen dry or difficult-to-iron  
fabrics, press the spray button (2). The  
spray function is also useful to dampen  
creases created by accident while ironing.  
The spray of water will come through the  
spray nozzle (9) (Fig. E).  
N.B.: It may be necessary to press the  
spray button several times to activate this  
function.  
11. LANGUAGE SELECTION  
9. EXTRA STEAM  
Hold the “lower temperature” setting down  
for 2 seconds (7) (Fig. H). EN will appear  
on the LCD screen (4). Press the “lower  
temperature” setting (7) again to change the  
language. The language will change from EN  
(English ) to DE (German), and from DE to  
FR (French). To select the desired language,  
press the “increase temperature” setting (6)  
and the language selected will be set.. N.B.:  
The default language is English.  
Switch the iron on, as indicated in Section 6  
“Steam ironing”. When the iron has reached  
the temperature selected, press the extra  
steam button (3) while ironing and the  
steam will come through the holes in the  
sole (Fig. F) onto the fabric, smoothing out  
the most difficult creases. Wait for at least  
5 seconds between each use of the extra  
13  
 
7. Move the iron carefully forward until  
the water reservoir is empty and let  
go of the self-clean button.  
8. Place the iron on its support base  
and leave it to cool down completely.  
9. Wipe the sole with a damp cloth.  
12. CLEANING AND MAINTENANCE  
Cleaning the water reservoir  
Unplug the iron. To empty the water  
reservoir, open the water inlet cover (8)  
and hold the iron with the hole facing  
downwards until all the water has run out  
(Fig. I). Shake the iron gently to remove any  
drops left inside.  
13. INFORMATION FOR THE  
CORRECT DISPOSAL OF ELECTRICAL  
AND ELECTRONIC APPLIANCES  
Storage  
Leave the iron to cool down before storing  
it away. If you do not use the iron on a  
daily basis, it is a good idea to empty the  
water reservoir after each use to extend the  
useful life of the iron. Wind the cord around  
the support base (do not wind tightly) and  
store the iron away on its base.  
At the end of its working  
life, the product must not be  
disposed of as urban waste.  
It must be taken to a special  
local authority differentiated  
waste collection centre or  
to a dealer providing this service. Disposing  
of a household appliance separately avoids  
possible negative consequences for the  
environment and health deriving from  
inappropriate disposal and enables the  
constituent materials to be recovered to  
obtain significant savings in energy and  
resources.  
Cleaning  
Unplug the iron and wait until it has cooled  
down before cleaning it. Clean the outside  
and the sole with a damp cloth. Do not use  
detergent or abrasive products. Do not  
immerse the iron in water or run it under  
the tap.  
To remind you that you must collaborate with  
a selective collection scheme, the symbol  
shown appears on the product warning  
you not to dispose of it in traditional refuse  
containers.  
For further information, contact your local  
authority or the shop where you bought the  
product.  
Self-clean  
This function will remove limescale and  
minerals accumulating in the steam  
chamber. The sole will need to be self-  
cleaned once you have used the steam  
function for 5 hours. When this is needed,  
the  
symbol will appear on the LCD  
screen (4).  
1. Half-fill the water reservoir, as described  
in Section 3 “Filling the water reservoir”.  
2. Place the iron upright and plug it in.  
Press the “increase temperature”  
regulator (6) to turn on the unit.  
3. Set the maximum temperature. See  
Section 4 “Setting the temperature”.  
4. Hold the “increase temperature”  
setting (6) down for 2 seconds to  
switch the iron off and then unplug it.  
5. Place the iron upright in the sink and  
hold the self-clean button (10) down.  
6. The steam and hot water will remove  
the limescale and minerals created in  
the steam chamber.  
14  
 

Edelbrock Automobile Parts R09399 User Manual
Electro Voice Portable Speaker EVM 15B User Manual
Extron electronic Network Router VNR 100 User Manual
Extron electronic Speaker SI 26W User Manual
Frigidaire Air Conditioner 000BTU User Manual
Frigidaire Air Conditioner FRS224YS1 User Manual
Frigidaire Range 316000653 User Manual
FujiFilm Digital Camera Z80 series User Manual
FUNAI CRT Television F4813T User Manual
Gigabyte Network Card GA 8I845GE775 G User Manual